Shout Box

...loading shoutbox...











Author Topic: I need a engine  (Read 4948 times)

Offline Nick

  • VIP
  • Full Member
  • *
  • Posts: 441
  • Street Cred: 2
    • Email
I need a engine
« on: October 01, 2008, 07:19:43 AM »
            I'll be picking up a shee from a friend pretty soon, but it has a blown engine that's not in the frame. I'm looking for maybe getting a new engine for it or rebuild this one.
I'm not sure what year it is, but the price is right no matter what. It's white, he said the plastics are great, new seat, 2 sets rims and tires, i think he said pro circut dual pipes, and he also mentioned "J" arms, so i might be needing A arms as well.
     I'm just waiting for him to get it from his parents house and that may be a couple weeks. So i'm just looking into future work..I was going to part it out, but i'm just going to keep it i think. oooorr maybe part it and put it into the raptor! ohhhhh that's a good idea...oh well,  i see there arn't many topics so this should keep some of ya's busy!

Offline theshee

  • Newbie
  • *
  • Posts: 78
  • Street Cred: 0
    • Email
Re: I need a engine
« Reply #1 on: October 01, 2008, 07:52:47 AM »
If it has the cases and cylinders just rebuild the motor. If it needs a crank they are cheap, a bore on the clylinders and new pistons are cheap too... They are brainless to rebuild, if you have any q's along the way hit me up.
4mil, K&T drag ported banshee, 1-5 duneable overide, CPI Inframes, +6 swinger, JJ&A Drag Axle- Just a slow Hillshooter
2009 RZR-S, Baja Front Bumper, 3500lb Winch, and full cooler of beer in the back!
2008 Yamaha Grizzly 700- All stock with some 26" Mudders!
2005 Polaris RMK 700, Piped and Ported!!

Offline Nick

  • VIP
  • Full Member
  • *
  • Posts: 441
  • Street Cred: 2
    • Email
Re: I need a engine
« Reply #2 on: October 01, 2008, 08:14:22 AM »
thanks, i'll look into it.
i may be hitting you up :grin_nod:

Offline jtraptor660

  • Newbie
  • *
  • Posts: 18
  • Street Cred: 0
    • Email
Re: I need a engine
« Reply #3 on: October 07, 2008, 03:40:30 PM »
easy and cheap reubuilds.  alot of fun as well.  you wont be needing any new a-arms if it has j-arms.

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36322
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: I need a engine
« Reply #4 on: October 13, 2008, 03:17:15 PM »
you should just bring it to my house and sell it to me, then you don't have to worry bout all of this stuff. :)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline jtraptor660

  • Newbie
  • *
  • Posts: 18
  • Street Cred: 0
    • Email
Re: I need a engine
« Reply #5 on: October 22, 2008, 02:20:02 PM »
i have a stock set of jugs bored .60 over with weisco pistons and cross hatch boring in the for sale section if you need a top end rebuild.  pretty quick set up.

Offline Mad Dog

  • Grand Masta Sexy
  • VIP
  • Hero Member
  • *
  • Posts: 1690
  • Street Cred: 24
Re: I need a engine
« Reply #6 on: October 22, 2008, 05:26:08 PM »
J-arms means she's an old girl, no newer than 89 or so.  There are kits for a-arms but you'll have to weld to the frame, it's not just a bolt on.

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36322
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: I need a engine
« Reply #7 on: October 23, 2008, 08:09:44 AM »
I still say you send that biatch down my way. 8)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline Peelz

  • Sugar Cookie
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 25586
  • Street Cred: 54
  • food makes me sick
    • Email
Re: I need a engine
« Reply #8 on: October 23, 2008, 08:32:54 AM »
did yot try bansheeHQ?

Also I need a engine?

Grammar ninja give up  :rofl:

Good luck. I still like riding the 'shees!
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Offline Nick

  • VIP
  • Full Member
  • *
  • Posts: 441
  • Street Cred: 2
    • Email
Re: I need a engine
« Reply #9 on: November 03, 2008, 10:43:06 AM »
update-
still getting the shee.
after hunting season when he brings it down.

go ninja !

have not went to bansheeHq yet....  once it's at my house i'll stat looking into it more.

I'll stick with J-arms, thanks guys. I don't know much about the shee but i'm a learnin!

Offline jtraptor660

  • Newbie
  • *
  • Posts: 18
  • Street Cred: 0
    • Email
Re: I need a engine
« Reply #10 on: November 05, 2008, 11:47:58 AM »
post up some pics when you get it.  im sure you will enjoy it.  J-arms are lighter and good for drag racing.  some people say they dont hold up to well in woods and rough riding but i have found that they hold there own in all types of riding.

Offline BLU700R

  • VIP
  • Full Member
  • *
  • Posts: 458
  • Street Cred: 1
  • Yamaha Simply The Best!!
    • Email
Re: I need a engine
« Reply #11 on: December 03, 2008, 10:27:24 AM »
I have a banshee frame and would love to find an engine for it! I have an 1100 harley motor but dont know if i want to chop the frame and do another drag-she
+2 TB+GYTR full exhaust+12.1 JE+PCIII+15T+HotCams2+GYTR Intake+Iridium Plug=Crazy Badassness


Man do I miss my wheeler :(

Offline Xylifrost

  • Newbie
  • *
  • Posts: 7
  • Street Cred: 0
  • ground control
    • Rescue hovercraft for sale in the US
I need a engine
« Reply #12 on: January 02, 2011, 09:59:15 AM »
What if the lights go out on your electronic dodad?
The gauges would sure be nice then.
Doug
To see reliable luxury cars rental deals in Los Angeles check my own resource.