Shout Box

...loading shoutbox...











Author Topic: Group Buy option...you choose  (Read 10561 times)

Offline Diggs59

  • VIP
  • Sr. Member
  • *
  • Posts: 646
  • Street Cred: 3
Re: Group Buy option...you choose
« Reply #45 on: October 17, 2010, 07:54:18 PM »
I'd be down for ASVs...ODI grips I doubt you'd get a group buy on, has been discussed before and I believe TQS said it would require a very large order (like 100 or 1,000) to get any price break on that...15 bucks is not that bad for those grips as it is.


! paid 20 like 2 years ago, so the price has went down from there? Haven't l0oked at them on a vendor site in a long time.
 

Offline Spartan

  • Most Picked on
  • Hero Member
  • *
  • Posts: 3270
  • Street Cred: 16
  • Koolaid maker
Re: Group Buy option...you choose
« Reply #46 on: October 17, 2010, 07:56:02 PM »
I paid 15 for mine direct from TQS, pretty sure that is what the going rate is still. It's like 3 bucks more for a custom engraving.

Offline Sand84

  • Original Gangsta
  • Site Sponsor
  • Hero Member
  • *
  • Posts: 1690
  • Street Cred: 9
    • Email
Re: Group Buy option...you choose
« Reply #47 on: October 17, 2010, 08:22:54 PM »
Yeah i like some other people paid for engraving but guess what?  NO ENGRAVING  :mad:   I'd be down for some ASV's depending on price and time of GB.
2009 Raptor 700- D7 :turbo: :satan:

Custom Carbon Creations

One stop shop for Carbon Covers for Raptor 700!!!

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36322
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: Group Buy option...you choose
« Reply #48 on: October 18, 2010, 09:00:56 AM »
If you didn't get engraving... why wouldn't you send them back? I got my ODI clamps engraved. Sa-weeeet!


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline Sand84

  • Original Gangsta
  • Site Sponsor
  • Hero Member
  • *
  • Posts: 1690
  • Street Cred: 9
    • Email
Re: Group Buy option...you choose
« Reply #49 on: October 18, 2010, 10:06:49 AM »
Why cause they where already here, they took forever and knew it would of been a headache.   :lol:
2009 Raptor 700- D7 :turbo: :satan:

Custom Carbon Creations

One stop shop for Carbon Covers for Raptor 700!!!

Offline Langford

  • VIP
  • Full Member
  • *
  • Posts: 330
  • Street Cred: 3
    • Email
Re: Group Buy option...you choose
« Reply #50 on: October 18, 2010, 02:12:05 PM »
Yeah i like some other people paid for engraving but guess what?  NO ENGRAVING  :mad:   I'd be down for some ASV's depending on price and time of GB.

Yessir, had the same thing happen when I ordered mine from that same place....
'07 powerwheels raptor...with a belt driven twin screw centrifugal turbocharger!  Wait for it, wait for it...!


Offline Diggs59

  • VIP
  • Sr. Member
  • *
  • Posts: 646
  • Street Cred: 3
Re: Group Buy option...you choose
« Reply #51 on: October 18, 2010, 02:44:56 PM »
I paid 15 for mine direct from TQS, pretty sure that is what the going rate is still. It's like 3 bucks more for a custom engraving.


Cool, I looked on Steve's site though and they're listed at 19.00 plus shipping, did you get them for 15.00 shipped?
 

Offline Spartan

  • Most Picked on
  • Hero Member
  • *
  • Posts: 3270
  • Street Cred: 16
  • Koolaid maker
Re: Group Buy option...you choose
« Reply #52 on: October 18, 2010, 02:52:09 PM »
If you contact him direct he usually knocks a few bucks off.

Offline Colorado700R

  • Always the big spoon!
  • Admin Pimp
  • Hero Member
  • *****
  • Posts: 15250
  • Street Cred: 50
  • Carpe Cerevisi!!! (Sieze the beer!!)
    • Email
Re: Group Buy option...you choose
« Reply #53 on: October 18, 2010, 03:43:05 PM »
Anyone else intrested in a Dynojet ignition module Group buy?  I'm about sick of these Dynateks going to shit.

Offline Spartan

  • Most Picked on
  • Hero Member
  • *
  • Posts: 3270
  • Street Cred: 16
  • Koolaid maker
Re: Group Buy option...you choose
« Reply #54 on: October 18, 2010, 03:59:56 PM »
If they are proven to be as good or better than dynateks, sure...

Addendum...these are just for the PC3s right? I think the PC5 uses its own different controller

Offline Kamakazi

  • Canucks
  • Hero Member
  • *
  • Posts: 1038
  • Street Cred: 6
  • even dodge dealerships wont take a ford on trade
    • Email
Re: Group Buy option...you choose
« Reply #55 on: October 18, 2010, 04:18:02 PM »
Anyone else intrested in a Dynojet ignition module Group buy?  I'm about sick of these Dynateks going to shit.

im game price depending, dl needs to come over here and lay down some info on these units
98% of north americans that hit the ditch say "oh shit", the other 2% are from saskatchewan and say "hold my beer and watch this"



Offline SprinterX

  • VIP
  • Jr. Member
  • *
  • Posts: 184
  • Street Cred: 0
Re: Group Buy option...you choose
« Reply #56 on: October 18, 2010, 11:17:56 PM »
How about an R.E. CNC head.  :thumbs:
08 Raptor 700

RE +1 head, X4 cam, TQS 11.5 piston, KDS +3 TB & evac, FCI,
Barkers duals, PC5 with A/T, Dyna Programmable, DL700 tune.
+2 I-Shock arms, Rock axle, reworked shocks, GTT link, +4 oem ext'd swinger
Elka Sys5 Dampner, Fasst Flexx on Rox anti-vibe risers, TT HIDs
Razr2 on HiPers, Skat 21/12/8 8pdl extremes, Sandstar frts
Roll bumper, PA guards/nerfs/skids

Offline Colorado700R

  • Always the big spoon!
  • Admin Pimp
  • Hero Member
  • *****
  • Posts: 15250
  • Street Cred: 50
  • Carpe Cerevisi!!! (Sieze the beer!!)
    • Email
Re: Group Buy option...you choose
« Reply #57 on: November 16, 2010, 11:26:21 AM »
EMAIL response I recieved from Fuelmoto regarding the Dynojet Igntion Module

"Hello, the Ignition module for PC III would run $299.00, if you could put together 10 or more we could do $289.00. There would be $12.95 shipping each."

There is not a compatiable PCV module at the moment.

Not a killer deal there, but it is what it is.

Aaron

Offline Langford

  • VIP
  • Full Member
  • *
  • Posts: 330
  • Street Cred: 3
    • Email
Re: Group Buy option...you choose
« Reply #58 on: November 20, 2010, 08:07:21 PM »
Anybody else possibly interested in some of the blingstar rotor and sprocket guards?
'07 powerwheels raptor...with a belt driven twin screw centrifugal turbocharger!  Wait for it, wait for it...!


Offline TWISTER

  • Newbie
  • *
  • Posts: 22
  • Street Cred: 0
    • Email
Re: Group Buy option...you choose
« Reply #59 on: November 21, 2010, 12:25:45 PM »
Id be in on the sprocket guard. :thumbs:
No sig