Cost Vs. Result

[Colorado700R]

What would it cost a friend to replicate your current build?
Lots of people wonder what it costs for a certain level of build, Lets post up our current builds components costs, and the performance results the build produced.

All new, no used components, just the price the average Joe would have to pay.

My 727 Stroker

COST

Power commander III- $259 http://fuelmotousa.com/power_commander.htm

FCI intake- $234 http://www.tqsatv.com/proddetail.php?prod=FCI-fuel-customs-intake

Barker dual exhaust/w clamps & SA- $669 http://www.tqsatv.com/products.php?cat=36

+5 hotrods crank-$285 http://www.tqsatv.com/products.php?cat=63

KDS Racing CNC head- $620 http://www.kdsracing.com/products/rapter-700-cnc-ported-cylinder-head/

KDS +3 throttle body- $220 http://www.kdsracing.com/products/velocity-pro-throttle-body/

Racer’s Edge Spec CP piston 12.5-1 - $230 http://www.racersedgeaz.com/products_list.php?catid=28

KDS cam- $285  http://www.kdsracing.com/products/612-camshaft/

Dynatek Programmable ignition- $269 http://www.tqsatv.com/products.php?cat=59

Dyno tune- $175 http://www.advantagetuning.com/
 
Total $3246

RESULT

73.6    DJHP /61.4 TQ

[PDX Raptor]

Some of my parts are older so I my prices might be a little off.
54mm TB w/58mm intake- $600 White Knuckle
PCIII-                           $259 Fuel Motto
DynoJet ignition              $325 Fuel Motto (might be cheaper now)
HR+5 crank /ballanced     $389 WK
105.5 cylinder                $900 WK  (I'm taking a guess on this one)
CP 10:75                       $190 WK
RE head                        $600 had a special going
X4 cam                         $210 WK
HD springs                     $165 WK
DD lock out                   $400 with cover exchange ( not sure if you can get this price anymore)
Barker big bore W/SA/QC $775             
Dyno tune/ temp gauge   $250   (Rooster, next month)
Denso pink injector          $120
Total                            $5083    (did it in my head someone double check)

Result                           Dyno is next month, but was just shy of 80hp and just over 55tq before TB and injector upgrade. I'll guess                           82hp/57tq.
These prices are guestimates. Some of the parts I have for almost 3 yrs. Others I paid less than most people would....one of the benefits of spending almost $10000 with one builder over the past 2 1/2 yrs.

[PeelsSE2]

Phoenix spark arrestor-$40 (free for xmas present)

Intake kit and filter $65 (free xmas present)

DObeck TFI $100 from a member here (actually $27 on trade)

non dyno tested high 40's hp baby!

$27 for 6-7 hp


HP per dollar, I pwn you all. unless we race

[Colorado700R]

good info guys, big build or small bolt ons....it don't matter.  Understanding options availble and there benefits vs costs is the reason I started on the forums in the first place, and hopefully we can help others make good decisions.

Aaron

[Raptoracer24]

Hands guards - $50
And they add 60 hp.

[Colorado700R]

Hands guards - $50
And they add 60 hp.

and minus all masculinity

JK

[Raptoracer24]

Hands guards - $50
And they add 60 hp.

and minus all masculinity

JK

You're just jealous cause my 1 mod bike will smoke yours..

[PeelsSE2]

so shocked this thread went ga-ga. I cannot believe it.

no handguards here. I am screwed

[MO RAPTOR 700]

Some of this was a package deal but here goes:
Big 3 Barkers, TRF Intake, PCV = 1052.00
11.5:1 Tech Piston, HCIII= 365.00
Head Porting= 199.00
DynaTek Programmable Programmer= 229.00
DynaTek Programmed= 40.00
+3 T.B.= 170.00
Total so far spent= $2055.00

No dyno results yet but will be finding out in the next month or so, hoping for mid 60 HP + range.
If I get get 65 hp and stock is say 42 hp thats a 23 HP gain so that means I have spent $89.34 per HP for 23 HP.  Oh well it's alot more fun to ride.

[txredxj]

i dont even want to add up what mine costs lol kinda sucks but prices have went down a bit since my build

[Colorado700R]

Krandall, Socalrappy, Mike, Tonto13, Troywcc, and everyone else........get on it!!  This thread could help people, and that's what we're here for.

[PeelsSE2]

Krandall, Socalrappy, Mike, Tonto13, Troywcc, and everyone else........get on it!!  This thread could help people, and that's what we're here for.

thought this one was a great idea.

Phoenix spark arrestor-$40 (free for xmas present)

Intake kit and filter $65 (free xmas present)

DObeck TFI $100 from a member here (actually $27 on trade)

non dyno tested high 40's hp baby!

$27 for 6-7 hp


HP per dollar, I pwn you all. unless we race

that is an estimated $3.86  per hp.

[Krandall]

Krandall, Socalrappy, Mike, Tonto13, Troywcc, and everyone else........get on it!!  This thread could help people, and that's what we're here for.

blah blah blah...

All I'm hearin.

[Krandall]

My 727 (bored)

COST

Power commander III- $259 http://fuelmotousa.com/power_commander.htm

Pro Design Intake $90 (K&N $60) http://tqsatv.com/proddetail.php?prod=PRO-DESIGN-FOAM-INTAKE

Barker dual exhaust/w clamps, Sparky's, and QC's - $750 http://www.tqsatv.com/products.php?cat=36

105mm Bore/Sleeve from Bo - $300 (I'm not 100% sure but it's close to this)

Bo White Track Port - $250

KDS +2 throttle body- $179

KDS Crank Case Evac Valve - $65 http://www.kdsracing.com/products/newly-designed-crankcase-evacuation-valves/

CP 10.75:1 105mm piston - $194 http://tqsatv.com/proddetail.php?prod=CP-SHELF-PISTON

Stage 2 Hot Cam - $140  http://tqsatv.com/proddetail.php?prod=hotcam-camshafts-atv
 
Total $2287 and some change.

RESULT

High 50's HP (possibly 60)

[Colorado700R]

Nice, Thanks Randy!!