Extended stock swinger PICS!

[700craptor]

i want one please? +3 will be nice.

[700craptor]

how muck for powder coat and do you do brake lines too?

[MORAPTOR700]

how muck for powder coat and do you do brake lines too?

I purchased a +3 brake line and it look all crap, so I just purchased some line and fittings and made my own and it looks a lot better. So I guess what I'm saying is purchase your own stuff and make it.

[700craptor]

one more question. does the skid plate still fit?

[MORAPTOR700]

one more question. does the skid plate still fit?

yes but you have to drill 2 holes for the front 2 bolts. I tigged a couple of 3/4" circle pieces of aluminum to swinger where it bolts to give it some more meat for the bolts to thread into.

[700craptor]

Very smart idea. Thanks hopefully outback can do the same for me

[Out Back Welding]

one more question. does the skid plate still fit?

yes but you have to drill 2 holes for the front 2 bolts. I tigged a couple of 3/4" circle pieces of aluminum to swinger where it bolts to give it some more meat for the bolts to thread into.

I weld in new boss's. I use 5/8" round stock and cut 3/4"...drill,tap, ect.. so you have lots of threads to work with!!

These are well built all around

thx, Darryll

[Out Back Welding]

oh...and I do this for no additional charge

[zx10r203]

I am thinking of getting a +4 or longer and really thinking of pulling the trigger and getting this done on my 09 700SE

I have a few questions to make sure that I can get all the needed parts for the project with the budget I have on hand now. Have a trip coming soon and don't want any issues and hold ups. 


What chain to get? I have no knowledge on type and length. Ride mostly on sand!

Rear brake line? I see TQS sells the Galfer Brake Line ($49.00) in a +4 length, will that work?

Rear brake parking cable? not really worried about that.  I am sure I can come up with something.

Anything else that I may need for the +4 setup besides the +4 swing arm???


Thanks in advance!!

[Krandall]

I'm yet to see an extended parking cable, so you may have to get ninja with that (moving the parking brake elsewhere).
My suggestion would be to buy a 120link chain and cut it down to what you need vs trying to find a specific / perfect length one. Way eaiser

If you ride mostly sand, I know duners opt for the non-oring chains. I still always prefered the X ring chains.

I'd have to do some looking, but I believe the +4 line is actually a bit longer than what you need. But I can't remember 100% for sure.

[zx10r203]

I'm yet to see an extended parking cable, so you may have to get ninja with that (moving the parking brake elsewhere).
My suggestion would be to buy a 120link chain and cut it down to what you need vs trying to find a specific / perfect length one. Way eaiser

If you ride mostly sand, I know duners opt for the non-oring chains. I still always prefered the X ring chains.

I'd have to do some looking, but I believe the +4 line is actually a bit longer than what you need. But I can't remember 100% for sure.

Not to worried about the cable, I am sure I can come up with something. 

I went to the Galfer website and I can order a brake line to the exact size I'll need since I am still unsure it will be a +4 or longer swing arm.

Either way thanks for the help!!!

[MORAPTOR700]

Motion Pro cable make you a e-brake cable last I heard it was about 35.00. For you brake line I ordered some S.S brake line, and some fitting and made my own line and it was cheap to do and looks great.

[Out Back Welding]

Motion Pro cable make you a e-brake cable last I heard it was about 35.00. For you brake line I ordered some S.S brake line, and some fitting and made my own line and it was cheap to do and looks great.

Spot on. Thats what I did.

The motion pro broke after 1 year of use... put the stock cable back on. Relocating it to the frame(left side).

I just got a long chain and cut it down.. as krandal said Don't buy China!  BUY Taiwan or Japanese

Darryll

[Out Back Welding]

Kinda cool to look back at this Topic.

I'm WAY better at these now.. I believe I've done 50 or so..

Darryll

[zx10r203]

Swing arm on its way to you OUTBACK!! Can't wait to see the finished swing arm.