Shout Box

...loading shoutbox...











« previous next »
Pages: [1]   Go Down

Author Topic: my 66 Chevy II  (Read 2372 times)

Offline Duane

  • Newbie
  • *
  • Posts: 75
  • Street Cred: 0
    • Email
my 66 Chevy II
« on: July 10, 2009, 04:09:44 AM »
getting back into this site since I need to order some more stuff for my Rappy. Stationed in Italy now so my Rappy is sitting for now but am making a trip home at the end of the year and plan to do some riding. So I figured I'd post up some pics of my other money pit. My 66 2 door post Chevy II, with moderately modded LS1/4L60e, 3200 stall eng/trans, TCI front clip with 12" wilwood disc, 9" Currie built rear, 3.50 geared tru-trac locker, Caltracs and some some other stuff here and there. Has a Dakota digital dash and I'm stock pile parts while I'm overseas, hopefully ordering my complete A/C setup, all new glass and a bunch of other little goodies that add up quickly.
Logged
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

Offline Livingmylife93

  • Hero Member
  • *****
  • Posts: 1335
  • Street Cred: 1
  • Ride Hard, Crash Harder, Laugh The Hardest
    • Email
Re: my 66 Chevy II
« Reply #1 on: July 10, 2009, 08:56:22 AM »
Sweet project  :thumbs:
Logged

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36323
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: my 66 Chevy II
« Reply #2 on: July 10, 2009, 09:08:47 AM »
SWEEEEEET FO SHEEZY!!!!!

I would have had an LS1. But, oilpump went out on it and motor locked :( :'(
Logged


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline Hefe

  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 48478
  • Street Cred: 1
  • Testicular Sanitation Personnel
    • Email
Re: my 66 Chevy II
« Reply #3 on: July 10, 2009, 09:34:02 AM »
very cool
1 question..
you have some serious blocks on the rear leaf springs to lower the ride height
are you leaving that like that?
will you have some sort of traction / panhard bars to limit axle wrap?
I would think with the power you are sure to have, and the rear end setup  that way, it would be not too good!
Logged

Offline Duane

  • Newbie
  • *
  • Posts: 75
  • Street Cred: 0
    • Email
Re: my 66 Chevy II
« Reply #4 on: July 10, 2009, 10:35:54 AM »
Quote from: Hefe on July 10, 2009, 09:34:02 AM
very cool
1 question..
you have some serious blocks on the rear leaf springs to lower the ride height
are you leaving that like that?
will you have some sort of traction / panhard bars to limit axle wrap?
I would think with the power you are sure to have, and the rear end setup  that way, it would be not too good!

I used the 3 inch blocks to help me with setting up ride height during the build, I figure with it together it'll drop a b it more and I will probably mill the blocks a inch and a half or so, I also have thicker U-bolts for it but are a hair short for those blocks. As for traction adder, yes, it has Caltracs on it. There in this picture, just missing the rod from the u-bolt plate to the front spring eye-bolt.


Logged
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

Offline Hefe

  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 48478
  • Street Cred: 1
  • Testicular Sanitation Personnel
    • Email
Re: my 66 Chevy II
« Reply #5 on: July 13, 2009, 12:03:53 PM »
there it is..
you can see why I would ask..
looks GREAT man!
very cool car!
Logged

Offline Duane

  • Newbie
  • *
  • Posts: 75
  • Street Cred: 0
    • Email
Re: my 66 Chevy II
« Reply #6 on: July 14, 2009, 11:50:29 AM »
thanks, I'm also going to paint it either grabber orange, or a variation of the color or a metallic green.
Logged
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

Offline Hefe

  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 48478
  • Street Cred: 1
  • Testicular Sanitation Personnel
    • Email
Re: my 66 Chevy II
« Reply #7 on: July 14, 2009, 12:47:36 PM »
green FTW
Logged

Offline Kamakazi

  • Canucks
  • Hero Member
  • *
  • Posts: 1038
  • Street Cred: 6
  • even dodge dealerships wont take a ford on trade
    • Email
Re: my 66 Chevy II
« Reply #8 on: July 15, 2009, 10:10:08 AM »
two tone, silver metal flake with carosel red. thats how id roll.
Logged
98% of north americans that hit the ditch say "oh shit", the other 2% are from saskatchewan and say "hold my beer and watch this"


Offline UncleBeaner

  • Original Gangsta
  • Super Chat Moderator
  • Hero Member
  • *
  • Posts: 1925
  • Street Cred: 17
  • el oh el
    • Brian'smomhastheclap.com
    • Email
Re: my 66 Chevy II
« Reply #9 on: January 04, 2010, 01:33:21 AM »
any updates?
Logged
:beans:
Pages: [1]   Go Up
« previous next »