Shout Box

...loading shoutbox...











Author Topic: Exhaust tips  (Read 3493 times)

Offline killrb

  • Newbie
  • *
  • Posts: 14
  • Street Cred: 0
    • Email
Exhaust tips
« on: April 26, 2009, 10:05:32 PM »
Ok i was looking a exhaust and i seen the looney tuned duals and they looked good does any one know if they are good or are there some better ones out there. I will be riding in the woods most of the time if that makes any difference

Offline Bocephus

  • Newbie
  • *
  • Posts: 45
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #1 on: April 27, 2009, 05:41:47 AM »
they are good, but i like the monster duals better.  id check into them as well.
2005 719 trail beater

Barker +4 rod/crank, 102mm 11:1 CP,Stage 3 Hotcam, KW springs, Ferrea valves, 39mm FCR's, ported by CSR
Monster dual exhaust, Hinson clutch & billet basket
RPM Dominator II +4 axle, homemade +2 swinger, Elka shock & link
ASR +2 a-arms, raptor SE shocks
ITP SS112 wheels w/ Maxxis Razr II's
Trail Tech Vapor
Pro Design shifter
PRM skid plates

Offline fastraptor

  • Jr. Member
  • **
  • Posts: 122
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #2 on: April 27, 2009, 03:24:58 PM »
+ 1 :thumbs:
2006 Raptor 700r
Monster Duals
Skat Trak Haulers 8 paddle smooth buff fronts
Monster flow intake  Monster Box Fuel Controller
UMI Handlebars  Twist Throttle

Offline NaturalRaptor

  • Potato King
  • VIP
  • Hero Member
  • *
  • Posts: 2446
  • Street Cred: 8
    • Email
Re: Exhaust tips
« Reply #3 on: April 27, 2009, 03:32:42 PM »
If you are looking for duals for the Raptor 700 the popular ones are: Barkers, Monsters, DMC Force 4, and Looney Tunes Exhaust.
Good luck! Search around the forum and you can find pics and opinions. 
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

Offline Peelz

  • Sugar Cookie
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 25586
  • Street Cred: 54
  • food makes me sick
    • Email
Re: Exhaust tips
« Reply #4 on: April 27, 2009, 03:45:30 PM »
If you are looking for duals for the Raptor 700 the popular ones are: Barkers, Monsters, DMC Force 4, and Looney Tunes Exhaust.
Good luck! Search around the forum and you can find pics and opinions. 

note the section we are in. :lol:

RaptorSource.com > Raptor 660 Information  > 660 Motor Mods > Post reply ( Re: Exhaust tips )

just messin with ya'
 
660 duals choices are Barker's Monster, and Looney Tuned. I think the Monsters are the only ones that are in frame.

Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Offline killrb

  • Newbie
  • *
  • Posts: 14
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #5 on: April 27, 2009, 04:40:56 PM »
yeah i think the looney tuned ones in frame to but thanks for all the help

Offline Peelz

  • Sugar Cookie
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 25586
  • Street Cred: 54
  • food makes me sick
    • Email
Re: Exhaust tips
« Reply #6 on: April 27, 2009, 05:37:15 PM »
yeah i think the looney tuned ones in frame to but thanks for all the help

you may be right.   :thumbs:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Offline Bocephus

  • Newbie
  • *
  • Posts: 45
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #7 on: April 27, 2009, 06:19:35 PM »
yes, the LTEs are in frame.  both mid pipes run on the RH side of the engine.  most sets like this will not worth with the aftermarket FCR carbs that many people like to use.  LTE claims they make a set that does clear the carbs though.....   iv never seen a set though.

with the monster's, one pipe runs down each side of the engine.  these work with pretty much any type of aftermarket setups (that im aware of)
2005 719 trail beater

Barker +4 rod/crank, 102mm 11:1 CP,Stage 3 Hotcam, KW springs, Ferrea valves, 39mm FCR's, ported by CSR
Monster dual exhaust, Hinson clutch & billet basket
RPM Dominator II +4 axle, homemade +2 swinger, Elka shock & link
ASR +2 a-arms, raptor SE shocks
ITP SS112 wheels w/ Maxxis Razr II's
Trail Tech Vapor
Pro Design shifter
PRM skid plates

Offline killrb

  • Newbie
  • *
  • Posts: 14
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #8 on: April 27, 2009, 06:44:36 PM »
i looked at the monster ones and i like those better but who knows i am in iraq and have nothing better to do but look at stuff for the atv and thanks for the help

Offline norby449

  • Newbie
  • *
  • Posts: 18
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #9 on: April 27, 2009, 07:46:46 PM »
I have the LTE's and they rock! They make more power than the others and they look great! Mine are polished but you can get them brushed or black.

Offline Bocephus

  • Newbie
  • *
  • Posts: 45
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #10 on: April 27, 2009, 08:34:48 PM »
care to explain why you think they make more power than the others?
2005 719 trail beater

Barker +4 rod/crank, 102mm 11:1 CP,Stage 3 Hotcam, KW springs, Ferrea valves, 39mm FCR's, ported by CSR
Monster dual exhaust, Hinson clutch & billet basket
RPM Dominator II +4 axle, homemade +2 swinger, Elka shock & link
ASR +2 a-arms, raptor SE shocks
ITP SS112 wheels w/ Maxxis Razr II's
Trail Tech Vapor
Pro Design shifter
PRM skid plates

Offline killrb

  • Newbie
  • *
  • Posts: 14
  • Street Cred: 0
    • Email
Re: Exhaust tips
« Reply #11 on: April 27, 2009, 09:30:18 PM »
could you try and put a close up pic of them up because i have not seen one yet

Offline NaturalRaptor

  • Potato King
  • VIP
  • Hero Member
  • *
  • Posts: 2446
  • Street Cred: 8
    • Email
Re: Exhaust tips
« Reply #12 on: April 27, 2009, 09:40:20 PM »
If you are looking for duals for the Raptor 700 the popular ones are: Barkers, Monsters, DMC Force 4, and Looney Tunes Exhaust.
Good luck! Search around the forum and you can find pics and opinions. 

note the section we are in. :lol:

RaptorSource.com > Raptor 660 Information  > 660 Motor Mods > Post reply ( Re: Exhaust tips )

just messin with ya'
 
660 duals choices are Barker's Monster, and Looney Tuned. I think the Monsters are the only ones that are in frame.



Sorry my bad!  :nun:
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

Offline Tim Barker

  • Site Sponsor
  • Jr. Member
  • *
  • Posts: 183
  • Street Cred: 4
    • Email
Re: Exhaust tips
« Reply #13 on: May 28, 2009, 07:11:53 PM »
care to explain why you think they make more power than the others?

I know a few shops that tested many different exhausts and Barkers made the most 3hp more than lte(monster did not have a set then so i don't know where they will place when tested)

Barkers Performance
www.barkersexhaust.com