Valve Clearances for different Cams

[Krandall]

I was thinking about this and may be a good thing to put up..

If you have a certain cam, could you post up the clearances that the intake/exhaust is supposed to be set for. May be a good helpful resource.  


I'll just update the first post to keep it all together.


Stock
     Intake:       .005" ~ .13mm
     Exhaust      .008" ~ .20mm


Hot Cam Stage 2  
     Intake:       .1mm
     Exhaust:     .18mm

Hot Cam Stage 3
     Intake:       .1mm
     Exhaust:     .18mm


All Megacycle
     Intake:       .005"
     Exhaust      .008"


All Web
     Intake        .006"-.008"
     Exhaust      .006"-.008"


KDS RJ
     Intake:       .006"
     Exhaust:     .008"


Barkers Cam
     Intake:       .005"
     Exhaust:     .008"


HDD 5050
     Intake:       .006 - .008"
     Exhaust:     .006 - .008"

[double06]

Same for the stage 3.

.1mm
.18mm

[Krandall]

bump

[Kenny]

All Megacycle .005" intake/.008" exhaust
All Web .006"-.008" intake/.006"-.008" exhaust
Stock .005" intake/.008" exhaust 

[Krandall]

Sweet, thx Kenny

[Gunz]

Hey Krandell

Stock
     intake     (.005 in)   ~ 0.13 mm
     exhaust   (.008 in)   ~ 0.20 mm

Just to maybe straighten out any head scratchers.

[Krandall]

updated, thanks bro

[Krandall]

*bump*

kenny, what are the clearances for the RJ

[DL700]

i recommend running the 5050 cam @ .006 for both intake and exhaust

[Gunz]

Barkers cam   
.005
.008

[Krandall]

updated list @ top of the page

[oldblue700rjo]

hey bud i got a je 12.5 piston and got a stage three hotcam what should i use on my valve clearance

[Spartan]

Hot Cam Stage 3
     Intake:       .1mm
     Exhaust:     .18mm

The piston has nothing to do with valve clearances.

[Krandall]

What spartan said.

[Spartan]

So on the 5050 should I just copy the KDS RJ specs? I'm gonna be doing my valve clearances in the next few days once I get the new timing plugs