Raptor 350 jet settings

[Flynbyu]

Post what your settings are here.

My neighbor's settings:


Location: Fort Smith, AR
Elevation: 466
Main jet: Mikuni 155 main jet.
Pilot jet: 25 Pilot
Mixture screw: 2.5 turns from fully seated.

Modifications: GYTR exhaust, airbox lid removed, high flow air filter.

~Brian

[07raptor 350]

Hey did you ever move a needle or no because I have the same set up and it dont work it just idels but when you said turn the mixture screw I did not turn it from fully seated I will give that a shot but any other ideas would be awesome to, by the way Flynbyu thanks for being one of the ones that created this website its much better than the other one!!!!!!! 

[Flynbyu]

Hey did you ever move a needle or no because I have the same set up and it dont work it just idels but when you said turn the mixture screw I did not turn it from fully seated I will give that a shot but any other ideas would be awesome to, by the way Flynbyu thanks for being one of the ones that created this website its much better than the other one!!!!!!! 

Move the mixture from fully seated, ten re-try.

I can't take credit for the site, Randy is the brains behind it.

~Brian